Deutsch
French
Dutch
Italian
Solar cleaning
Article 1 - 20 from 52
- Original spare part
- suitable for the CLEANTECS lichen remover
- Complete set for removing lichen from PV systems
- incl. lichen remover
- incl. 8 GARDINER SD extensions no. 10
- incl. SOLA-TECS HD hose 25 m
- 9-piece high-end Kevlar telescopic pole
- approx. 14.02 meter length / approx. 2900 gram weight
- made entirely from HM carbon fibers incl. Kevlar content
- complete incl. accessories and brush
- for professionals and frequent use at very great heights
- Cleaning robot for solar and PV systems
- Increase in m² output by almost 20% (compared to standard brush system)
- Completely manufactured and developed "made in Germany"
- approx. 1100-2400 m²/h surface performance
- Can be used on inclines of up to 25°
- Easy to dismantle
- Optimum cleaning result
- 2 x 1,300 mm brushes
- Easy to operate via radio remote control up to 100 m range
- no physical strain for the operator
- incl. edge detection incl. auto-stop
- incl. Auto-Drive
- against stubborn dirt and lichens
- for basic and intensive cleaning of PV systems and solar modules
- for chemical-free lichen removal
- is installed instead of a brush
- Gentle and efficient cleaning with pure water
- High-quality professional pump made in Germany
- mobile and robust
- especially for the solarROBOT pro lichen remover
- 1320 liters per hour max.
- 400 volt device
- incl. OSMOBIL MAX 750 L clean water system
- incl. solarROBOT pro solar robot with 2 brushes
- incl. GARDINER CLX 18 for close-up cleaning and pre-cleaning
- incl. hoses & unwinder, cable reel and matching accessories
- Price advantage of over € 1,000
- Mobile & lightweight work platform
- safe working on PV systems
- protects the solar module from damage
- made of aluminum
- easy to use
- made in Germany
- Safe access to the PV system
- Mobile & lightweight work platform
- Protection against damage
- secures the worker
- made in Germany
- Length: 2040 mm
- Safe access to the PV system
- Mobile & lightweight work platform
- Protection against damage
- made in Germany
- Cleaning robots for solar and PV systems
- Completely manufactured and developed "made in Germany
- approx. 1100-2400 sqm/h surface performance
- usable up to 25° inclination
- Easy to dismantle
- Optimum cleaning result
- 2 x 1,100 mm brushes
- Easy to operate via radio remote control up to 100 m range
- no physical strain for the operator
- incl. edge detection incl. auto-stop
- incl. Auto-Drive
- 6-piece professional telescopic pole made from 100% 3K carbon
- complete incl. accessories and brush
- for professionals and frequent use
- approved for heavy, rotating brushes (SOLA-TECS C & ROTAQLEEN)
- approx. 8.10 meter length / approx. 1690 gram weight
- 9-piece professional telescopic pole made from 100% 3K carbon
- complete incl. accessories and brush
- for professionals and frequent use
- approved for heavy, rotating brushes (SOLA-TECS C & ROTAQLEEN)
- approx. 15.00 meter length / approx. 3340 gram weight
- 14-piece high-end Kevlar telescopic pole
- approx. 22.26 meter length / approx. 5800 gram weight
- made entirely of HM carbon fibers incl. Kevlar content
- complete incl. accessories and brush
- for professionals and frequent use at very great heights
- Up to 410 liters of pure water per hour
- X-Flow system for direct connection to high-pressure devices, pumps, valves, etc.
- two connections for telescopic rods and co.
- intelligent volume control / up to 25% water savings
- incl. truck tarpaulin bag
- digital control display incl. membrane performance
- up to 12 weeks service life in winter "without flushing"
- running costs of less than €1 per 1000 liters of clean water
- robust & made in Germany
- Low-maintenance osmosis technology
- simple operation
- super support
- buy directly from the manufacturer
- Cleaning robots for solar and PV systems
- Completely manufactured and developed "made in Germany"
- approx. 800-1100 sqm/h surface performance
- Can be used on inclines of up to 20°
- Can be dismantled into 6 components weighing max. 10 kg
- no crane or lift necessary (but still craneable)
- Optimum cleaning result
- 2 x 800 mm brushes
- can be offset up to 1100 cm wide if required
- Easy to operate via radio remote control up to 100 m range
- Easy. Simple. Compact.
- No physical strain for the operator
- Optional with edge detection incl. auto-stop
- Cleaning robots for solar and PV systems
- Completely manufactured and developed "made in Germany"
- 2 x 1,150 mm brushes
- Particularly suitable for elevated flat roof systems
- approx. 800-1100 sqm/h area performance
- Can be used on inclines of up to 20°
- Easy to dismantle into 6 components
- No crane or lift required (but still craneable)
- Optimum cleaning result
- easy to operate via radio remote control up to 100 m range
- Easy. Simple. Compact.
- No physical strain for the operator
- Optional with edge detection incl. auto-stop
- Up to 240 liters of pure water per hour
- Motor, pump and X-Flow technology from the OSMOBIL PRO X
- running costs of less than €1 per 1000 liters of pure water
- Particularly compact and lightweight
- robust & made in Germany
- low-maintenance osmosis technology
- simple operation
- super support
- buy directly from the manufacturer
- fits immediately on all GARDINER poles!
- Brush for cleaning solar modules
- many different pads available
- removes more dirt thanks to 4 "base nozzles" on the underside
- Water flows over the brush, so more rinsing water is available
- 55 cm wide - cleans a PV panel with 2-3 movements
- saves working time & power
- is very efficient
- suitable for the GARDINER telescopic poles
- incl. adjustable angle adapters
- incl. adapter for 8 mm telescopic pole hose
- Sturdy professional quality
- particularly compact & lightweight
- very low water consumption (from 300 L/hour)
- High mechanical cleaning effect
- good handling
Article 1 - 20 from 52
Solar cleaning systems safe, effective, chemical-free & environmentally friendly. With the systems and kits we offer, photovoltaic systems can be cleaned without chemicals, in an environmentally friendly manner and from the safety of the ground. The performance of a photovoltaic system depends, among other things, on its cleanliness. Bird droppings, lichen, dust etc. can limit the performance of a system and lead to economic losses; you can counteract this with professional solar cleaning. Cleaning with pure water is one of the safest and most effective methods to avoid damaging the solar modules during cleaning.
We offer systems from Cleantecs, QLEEN and hyCLEANER - from solar cleaning with a SOLA-TECS C or a ROTAQLEEN on a telescopic pole to quick, easy and efficient cleaning with a solar robot - you can find everything here. We offer entry-level systems as well as high-end solutions for ground-mounted, roof-mounted and ground-mounted PV systems.