Deutsch
French
Dutch
Italian
Robots, rotating brush systems & lamella cleaners
- for the connection of 2 Quattro-Push-Fits
- enables water supply via 8 nozzles
- for telescopic pole hose 8mm
- Range up to 15 m
- made of carbon
- low weight
- incl. 25 meter HD hose
- Range up to 12 m
- made of carbon
- low weight
- incl. 25 meter HD hose
- Enormous range of up to 15 m
- Professional system made of 100 % carbon
- Lightweight with low deflection
- Incl. 25 m internal HD hose
- Incl. rubber foot, adapter and sliding brush set
- Available ranges: 12 m and 15 m
- Supplement to SOLA-TECS C
- enables the water flow to be stopped
- 2-way ball valve
- made of galvanized steel
- simple operation
- Protection against splashing water during cleaning
- Cleaning robots for solar and PV systems
- Completely manufactured and developed "made in Germany
- approx. 1100-2400 sqm/h surface performance
- usable up to 25° inclination
- Easy to dismantle
- Optimum cleaning result
- 2 x 1,100 mm brushes
- Easy to operate via radio remote control up to 100 m range
- no physical strain for the operator
- incl. edge detection incl. auto-stop
- incl. Auto-Drive
- Cleaning robots for solar and PV systems
- Completely manufactured and developed "made in Germany"
- approx. 800-1100 sqm/h surface performance
- Can be used on inclines of up to 20°
- Can be dismantled into 6 components weighing max. 10 kg
- no crane or lift necessary (but still craneable)
- Optimum cleaning result
- 2 x 800 mm brushes
- can be offset up to 1100 cm wide if required
- Easy to operate via radio remote control up to 100 m range
- Easy. Simple. Compact.
- No physical strain for the operator
- Optional with edge detection incl. auto-stop
- Stopcock for the SOLA-TCS C
- stops the water flow
- made of nickel-plated brass
- perfect solution for working at short distances
- High-pressure ball valve
- Mounted on a suction cup
- Flexible stopcock
- Incl. metal slide
- For interrupting the water supply
- Stops rotation of the brush (SOLA-TECS C and W)
- Spare part
- suitable for SOLA-TECS W 800 mm and W 1000 mm
- Turbine wheel for the right-hand side
- incl. ceramic ball bearing
- Spare part
- suitable for SOLA-TECS W 800 mm and W 1000 mm
- Turbine wheel for the left side
- incl. ceramic ball bearing
- Spare part
- suitable for SOLA-TECS W 800 mm and W 1000 mm
- incl. deep groove ball bearing
- Protects the solar modules and makes work easier
- Better and smoother running of the device
- Very stable professional quality
- Replacement brush
- available for all SOLA-TECS W models
- Suitable for all SOLA-TECS W and W PRO models
- Spare part
- Spare part
- suitable for SOLA-TECS W 800 mm PRO
- suitable for SOLA-TECS W 1000 mm PRO
- Gearbox housing for the left side
- simple replacement
- Spare part
- suitable for all SOLA-TECS W models
- reduces vibrations
- easier operation
- better controllability
- Spare part
- suitable for all SOLA-TECS W models
- Gearbox housing right
- quick and easy replacement
- Spare part
- suitable for all SOLA-TECS W models
- Gearbox housing left
- quick and easy replacement
- Spare part
- suitable for SOLA-TECS W 800 mm and W 1000 mm
- Gearbox cover for the right-hand side
- Suitable for SOLA-TECS W 800 mm and W 1000 mm
- Spare part
- Gearbox cover for the left side
- Spare part
- suitable for all SOLA-TECS W models
- Stable control of the brush roller
- Connection between high-pressure hose and SOLA-TECS W
- Sturdy professional quality
- Direction of rotation can be changed
- high mechanical cleaning effect
- good handling
- Relatively low water consumption (max. 600 l/h)
- stable professional quality
- high mechanical cleaning effect
- good handling
- Relatively low water consumption (max. 600 l/h)
- Sturdy professional quality
- Direction of rotation can be changed
- high mechanical cleaning effect
- good handling
- Relatively low water consumption (max. 600 l/h)
- stable professional quality
- high mechanical cleaning effect
- good handling
- Relatively low water consumption (max. 600 l/h)
- Spare part
- Suitable for SOLA-TECS W 1000 and 1000 PRO
- quick & easy replacement
- Spare part
- suitable for SOLA-TECS HD hose 25m internal
- for the end of the hose that goes into the telescopic rod
- quick & easy replacement
Here you will find rotating brush systems for solar cleaning and slat cleaning from market leaders Cleantecs, QLEEN and SPS-Cleaning-Systems. In close cooperation with the manufacturer, we exclusively offer the water-saving version of the SOLATECS C, among others. This can already manage with 300 liters of clean water per hour and delivers the full torque.BREAKRotating brush systems are used when the mere mechanics and the power of the clean water are no longer sufficient to achieve the desired result during cleaning work. The cleaning of very large areas or solar systems or slat systems can also be a reason to use a rotating system or a cleaning brush for slats. What is really innovative here is the operation of these water-pressure driven systems with pure water. This means that the surfaces to be cleaned do not even come into contact with the sometimes very hard and calcareous city water. Especially in summer, this water dries up very quickly anyway. In regions with water hardness of more than 20 degrees DH, subsequent cleaning can be more time-consuming than the actual cleaning to remove dirt and deposits. Accordingly, we recommend operating the systems directly with pure water that has previously been obtained using an osmosis system or a mixed bed resin. As 300 liters or more per hour are required here, even in the most economical version, the use of an osmosis system is generally the most economical, as there are no significant running costs. We will be happy to advise you in detail on which rotary washing system is best suited to your project and how you can operate it most cost-effectively with pure water.
