Deutsch
French
Dutch
Italian
Robots and accessories for cleaning solar systems and glass roofs
Article 1 - 20 from 36
- Cleaning robots for solar and PV systems
- Completely manufactured and developed "made in Germany
- approx. 1100-2400 sqm/h surface performance
- usable up to 25° inclination
- Easy to dismantle
- Optimum cleaning result
- 2 x 1,100 mm brushes
- Easy to operate via radio remote control up to 100 m range
- no physical strain for the operator
- incl. edge detection incl. auto-stop
- incl. Auto-Drive
- Cleaning robots for solar and PV systems
- Completely manufactured and developed "made in Germany"
- approx. 800-1100 sqm/h surface performance
- Can be used on inclines of up to 20°
- Can be dismantled into 6 components weighing max. 10 kg
- no crane or lift necessary (but still craneable)
- Optimum cleaning result
- 2 x 800 mm brushes
- can be offset up to 1100 cm wide if required
- Easy to operate via radio remote control up to 100 m range
- Easy. Simple. Compact.
- No physical strain for the operator
- Optional with edge detection incl. auto-stop
- incl. OSMOBIL MAX 750 L clean water system
- incl. solarROBOT pro solar robot with 2 brushes
- incl. GARDINER CLX 18 for close-up cleaning and pre-cleaning
- incl. hoses & unwinder, cable reel and matching accessories
- Price advantage of over € 1,000
- Professional water system OSMOBIL PRO X
- Robot for solar cleaning solarROBOT compact 800 mm with edge detection incl. auto-stop function
- Telescopic pole for close range GARDINER CLX 18
- Professional sets of metal dispensers 3/4" and 3/8"
- Professional cable reel
- Price advantage of over 900,- €
- Suitable for the hyCLEANER solarROBOT compact and pro
- quick and easy cleaning of the traction belts
- incl. wringing device
- made of plastic
- spare part
- suitable for hyCLEANER solarROBOT pro and compact
- for wet and smooth surfaces
- Optimized properties
- with patented grip pattern
- solarROBOT pro requires 8 sections
- solarROBOT compact requires 6 sections
- Equipped with 4 large pneumatic wheels
- Safe transportation of the solarROBOT pro
- ergonomic
- incl. 4 centering devices to secure the solar cleaning robot
- Extension for the solarROBOT pro
- for applications without water
- e.g. for sweeping off sand dust
- Spare part
- suitable for the solarROBOT pro
- enables work on wet and smooth surfaces up to 25° inclination
- can be used from an ambient temperature of 5°
- additionally stabilizes the solarROBOT pro
- Quick assembly thanks to simple plug-in system
- incl. 2 x neoprene traction belts
- for cleaning ground-mounted systems up to 47° inclination
- increases the cleaning width
- is screwed onto the spray protection hood
- Set consisting of 2 offset arrangements
- one offset arrangement required per brush system
- suitable for the solarROBOT pro
- Roller set consisting of 4 protective adapters
- Enables precise driving out of flat roofs
- Support element
- prevents damage to the PV system
- Suitable for the hyCLEANER solarROBOT pro
- suitable for hyCLEANER solarROBOT pro lichen remover
- suitable for hyCLEANER solarROBOT pro lichen remover HD cleaner DIEKER HD-E 22/200
- 360° swivel water guide
- Easy connection to high-pressure hoses
- High-quality professional pump made in Germany
- mobile and robust
- especially for the solarROBOT pro lichen remover
- 1320 liters per hour max.
- 400 volt device
- against stubborn dirt and lichens
- for basic and intensive cleaning of PV systems and solar modules
- for chemical-free lichen removal
- is installed instead of a brush
- Gentle and efficient cleaning with pure water
- can be mounted directly on the solarROBOT pro or on the double suction plates
- Increase in m² output by almost 20 % (compared to standard brush system)
- large diameter
- padded bristle tips
- suitable for the solarROBOT pro
- Replacement brush system for solarROBOT pro
- large brush diameter
- padded bristle tips
- Supply voltage 230 V AC
- Current consumption 35 mA AC
- Charging current 650 mA
- suitable for the solarROBOT pro
- Cleaning robot for solar and PV systems
- Increase in m² output by almost 20% (compared to standard brush system)
- Completely manufactured and developed "made in Germany"
- approx. 1100-2400 m²/h surface performance
- Can be used on inclines of up to 25°
- Easy to dismantle
- Optimum cleaning result
- 2 x 1,300 mm brushes
- Easy to operate via radio remote control up to 100 m range
- no physical strain for the operator
- incl. edge detection incl. auto-stop
- incl. Auto-Drive
Article 1 - 20 from 36
Robots and remote-controlled systems for the economical and particularly efficient cleaning of solar installations and glass roofs can be found here. All systems offered are "made in Germany" and come directly to you from the market leader TG Hylift. We would be happy to advise you on your cleaning project in the field of PV system and solar system cleaning. Many systems can also be used on glass roofs using pure water and increase the cost-effectiveness of your cleaning services immensely. It's not just the working speed that increases. You can also benefit from increased work safety and save on expensive height access technology.
