Deutsch
French
Dutch
Italian
Robots and accessories for cleaning solar systems and glass roofs
Article 1 - 30 from 36
- Spare part
- suitable for the solarROBOT comfort
- Cleaning on wet and smooth surfaces
- up to 20° inclination possible
- suitable for hyCLEANER solarROBOT pro and compact
- for wet and smooth surfaces
- Optimized properties
- with patented grip pattern
- solarROBOT pro requires 8 sections
- solarROBOT compact requires 6 sections
- Spare part
- suitable for the solarROBOT pro
- enables work on wet and smooth surfaces up to 25° inclination
- can be used from an ambient temperature of 5°
- Suitable for the solarROBOT transport trolley (pro and compact)
- for lifting the solarROBOT
- made of stainless steel
- max. load 150 kg
- Storage canister
- 10 liters
- For the care and cleaning of traction treadmills
- Increases longevity
- Cleaning robots for solar and PV systems
- Completely manufactured and developed "made in Germany"
- approx. 800-1100 sqm/h surface performance
- Can be used on inclines of up to 20°
- Can be dismantled into 6 components weighing max. 10 kg
- no crane or lift necessary (but still craneable)
- Optimum cleaning result
- 2 x 800 mm brushes
- can be offset up to 1100 cm wide if required
- Easy to operate via radio remote control up to 100 m range
- Easy. Simple. Compact.
- No physical strain for the operator
- Optional with edge detection incl. auto-stop
- Replacement battery
- suitable for the solarROBOT compact and pro
- Low weight and small design
- For cleaning the traction belts
- Contents: 1000 ml
- Can be used with cold water
- Parallel charging of two battery packs 36V/14Ah & one battery for radio remote control
- Fast charging time (2-2.5 hours)
- incl. emergency radio
- Cleaning robots for solar and PV systems
- Completely manufactured and developed "made in Germany"
- 2 x 1,150 mm brushes
- Particularly suitable for elevated flat roof systems
- approx. 800-1100 sqm/h area performance
- Can be used on inclines of up to 20°
- Easy to dismantle into 6 components
- No crane or lift required (but still craneable)
- Optimum cleaning result
- easy to operate via radio remote control up to 100 m range
- Easy. Simple. Compact.
- No physical strain for the operator
- Optional with edge detection incl. auto-stop
- Suitable for the hyCLEANER solarROBOT compact
- width: 1,150 mm
- larger cleaning width
- Particularly suitable for elevated flat roof systems
- Spare part
- suitable for hyCLEANER solarROBOT compact
- width: 800 mm
- large brush diameter, long bristles & high brush rotation
- Spare part
- suitable for the hyCLEANER solarROBOT compact
- quick & easy replacement
- Suitable for the hyCLEANER solarROBOT compact
- quick & easy installation
- spare part
- suitable for the hyCLEANER solarROBOT compact
- Carbon design
- Width: 1,150 mm
- to cover the brush
- protects cleaned areas from dirty water
- quick & easy attachment
- to cover the brush
- protects cleaned areas from dirty water
- quick & easy attachment
- suitable for the hyCLEANER solarROBOT compact
- carbon design
- width: 800 mm
- Spare part
- suitable for the solarROBOT compact
- for cleaning work without water
- suitable for the solarROBOT compact
- easy transportation
- easy on the operator's back
- Cleaning robot for solar and PV systems
- Increase in m² output by almost 20% (compared to standard brush system)
- Completely manufactured and developed "made in Germany"
- approx. 1100-2400 m²/h surface performance
- Can be used on inclines of up to 25°
- Easy to dismantle
- Optimum cleaning result
- 2 x 1,300 mm brushes
- Easy to operate via radio remote control up to 100 m range
- no physical strain for the operator
- incl. edge detection incl. auto-stop
- incl. Auto-Drive
- Supply voltage 230 V AC
- Current consumption 35 mA AC
- Charging current 650 mA
- suitable for the solarROBOT pro
- Replacement brush system for solarROBOT pro
- large brush diameter
- padded bristle tips
- Increase in m² output by almost 20 % (compared to standard brush system)
- large diameter
- padded bristle tips
- suitable for the solarROBOT pro
- against stubborn dirt and lichens
- for basic and intensive cleaning of PV systems and solar modules
- for chemical-free lichen removal
- is installed instead of a brush
- Gentle and efficient cleaning with pure water
- High-quality professional pump made in Germany
- mobile and robust
- especially for the solarROBOT pro lichen remover
- 1320 liters per hour max.
- 400 volt device
- suitable for hyCLEANER solarROBOT pro lichen remover
- suitable for hyCLEANER solarROBOT pro lichen remover HD cleaner DIEKER HD-E 22/200
- 360° swivel water guide
- Easy connection to high-pressure hoses
- can be mounted directly on the solarROBOT pro or on the double suction plates
- additionally stabilizes the solarROBOT pro
- Quick assembly thanks to simple plug-in system
- incl. 2 x neoprene traction belts
- for cleaning ground-mounted systems up to 47° inclination
- Roller set consisting of 4 protective adapters
- Enables precise driving out of flat roofs
- Support element
- prevents damage to the PV system
- Suitable for the hyCLEANER solarROBOT pro
- increases the cleaning width
- is screwed onto the spray protection hood
- Set consisting of 2 offset arrangements
- one offset arrangement required per brush system
- suitable for the solarROBOT pro
- Extension for the solarROBOT pro
- for applications without water
- e.g. for sweeping off sand dust
Article 1 - 30 from 36
Robots and remote-controlled systems for the economical and particularly efficient cleaning of solar installations and glass roofs can be found here. All systems offered are "made in Germany" and come directly to you from the market leader TG Hylift. We would be happy to advise you on your cleaning project in the field of PV system and solar system cleaning. Many systems can also be used on glass roofs using pure water and increase the cost-effectiveness of your cleaning services immensely. It's not just the working speed that increases. You can also benefit from increased work safety and save on expensive height access technology.
