High-pressure kit for GARDINER telescopic poles for Element 6

Description

High-pressure kit for GARDINER telescopic poles for Element 6 was specially developed by us so that you can now also carry out high-pressure work at height with your GARDINER telescopic pole. Expand your area of application with this innovative product and take advantage of the benefits of telescopic technology in conjunction with high-pressure applications. You also increase your work safety by high-pressure cleaning at height from the ground.
The kit is suitable for the 6th pole element of the GARDINER pole and is attached to the telescopic pole using the fitting.

To get started, remove the end cap from the pole, feed the high-pressure hose through it and connect the desired cleaning tool to the pole using the GARDINER HD adapter for element 1. Don't forget to lower the adapter into element no. 1 and tighten it. Finally, all you have to do is connect the high-pressure gun to the high-pressure cleaner and you're ready to get to work. You can see how to guide the hose back into the gun in the video below. You can also find a video here in which we show you how to work with the kit and a floor squeegee used for other purposes as well as the innovative Nozzle carrier for HD telescopic lancefrom VF Reinigungstechnik.
Please note that each high-pressure cleaner has a different water output and working pressure and requires corresponding nozzles!

Expert tip: Practice is key when using the high-pressure kit. The first few times you use it, slowly test out the weight and forces involved. We therefore recommend that you first operate the gun suspended in the air before setting up the Pole high on the façade!